ADT761-BP Calibrateur de pression automatique

ADT761-BP Calibrateur de pression automatique - Prisma Demande de devis

Série Additel 761-BP

With a built-in high performance electronic pump and precision pressure controller, the 761 series portable automated pressure calibrators provide a turn-key solution for calibration of gauges, transmitters, and switches both in the field and in the laboratory. In a portable package, this calibrator can automatically generate pressures from 100hPa to 1200hPa.

The 761-BP is specially designed for low pressure calibration . With a quartz pressure sensor , the accuracy of 761-BP can achieve 0.01%FS accuracy .

In addition to the pressure generation, control, and measurement capabilities, the 761 also features HART communication capability, supplies 24V loop power, and reads the current or voltage produced by the pressure transducers. The 761 is a state of the art automated pressure calibrator which brings automated pressure calibration to the field.

 

  • Caractéristiques
  • Spécifications
  • Fiche Technique

• Pressure Range
Pressure generated by built-in pump and controlled automatically from 90% vacuum to 600 psi (40 bar)
Pressure measured with external pressure modules (160 series) to 10,000 psi (700 bar)
Accuracy (Fully temperature compensated)
0.01%FS(ADT761-BP)

• Control Stability
<0.005%FS

• Contamination prevention system
Built-in filter and liquid trap with venting system prevent contamination of the calibrator
Solid particles can be blocked by built-in filter
A small amount of Liquid can be collected by the built-in liquid trap
Both solid particles and liquid can be blown out through the venting system

• Automation and Test Program
Fully Automated pressure calibration
Task preset and auto run
Auto step

• Easy to Use
User friendly interface
Intuitive icon driven menu structure

• Sourcing and Measuring electrical signals
Measure mA with 0.01%RD + 1.5μA accuracy
Measure V with 0.01%RD + 1.5mV accuracy
Source/sink 0 to 22mA current
24 VDC loop power supplied to pressure transmitter during test
Automated switch test

• Misuse Protection
Up to 30V misuse protection on any two sockets

• Display
7" LCD color screen (800X480)

• Documenting and data logging
Task management capability
Internal memory stores 200 tasks
Download tasks and upload results

• HART Communication capability
Support HART instrumentation

• Rechargeable battery:
Rechargeable battery with up to 8 hours operation between charges

• Leak testing:
Apply leak test to an external pressure system to determine the magnitude of pressure variations due to leaks

• Pipeline Protection:
Special design the pipeline layout to avoid possible blockage and leakage

• Portable:
Only 12.4 lb

• Multi Lingual Interface
English, German, French, Italian, Spanish, Portuguese, Simplified Chinese
(Traditional Chinese, Japanese and Russian are available per request)

• NIST Traceable:
NIST traceable calibration with data (included)

 

• Control Stability
<0.005%FS;

• Pressure Connections
One ADT100-761 Hose Test Kit with quick connector (included except with ADT761-LLP)
1/8 BSP female connector on calibrator
Two 1/4NPT(or 1/2NPT, 1/4BSP, M20×1.5) female hand-tight connectors on the external pressure manifold (included except with ADT761-LLP)

• External Pressure Module Connection
External pressure module connector

• Electrical Connection
0.156 inch (Ø4mm) banana sockets

• Documenting and data logging
Task management capability
Internal memory stores 200 tasks
Download tasks and upload results

• Display
7" LCD color screen (800×480)
Display rate: 5 readings per second

• Pressure Units
hPa (ADT761-BP)

• Power
Battery: Rechargeable Li-ion Polymer battery (included)
Li-Battery working time: ~8 hours
Recharge time: ~3 hours
External Power: 110/220V Power adapter (DC 27 V) (Included)

• Environmental Specification:
Operating temperature: 32°F to 122°F (0°C to 50°C)
Compensated Temperature: 32°F to 122°F (0°C to 50°C)
Storage temperature: -20°C to 60°C
Humidity: <90%, non-condensing

• European Compliance:
CE Marked

• Communication
RS232 (DB9/F, environmentally sealed)
Baud rate: 2400, 4800, 9600, 19200, 38400, 57600, 115200
Data length: 7 Bits, 8 Bits
Stop bit: 1 Bit, 2 Bits
Address: from 1 to 121

• Dimension
11.65" X 7.32" X 7.09"(296mm X186mm X180mm)

• Weight:
12.4 lb (5.6 kg)

• Warranty:
18 months

 

Télécharger la fiche technique PDF manomètre (PDF Calibrateur de pression automatique)