Three Valve, Direct Mounting - T Type

Demande de devis

Series: G3VMPF1

Three Valve Manifold, Direct Mounting - T Type

 

Designed for direct mounting on to standard differential pressure transmitters. This manifold block incorporates three valves, two main process isolation valves and one equalising valve. Dimensions shown above are for the standard 54 mm or 2 1/8 inch instrument connection Centre distance found in majority of instruments. The manifold is also available for instruments with other centre distances for instrument connections (as 55 mm, 56 mm and 57 mm) but dimensions shown will vary. Please consult us for these dimensions.

  • Caracteristiques
  • Fiche Technique
  • Informations

Spécifications

Connections Process : ¬Ĺ" NPT (F)
Instrument : Direct on instrument
Drain/Vent : ¬ľ" NPT (F)
Test Pressure
@ 25¬įC Room Temperature
Hydrostatic : Body - 620 bar
Seat - 415 bar
Pneumatic : Seat - 40 bar
Gland Packing
PTFE : Standard
GRAPHOIL: Temperatures above 180¬įC
Material
A 105, A 182 GR F 304,
A 182 GR F 316, Monel, Hastelloy
Finish CS zinc plated. SS Natural
Mounting Kit
Mounting bracket with U bolts and necessary kits
for fitting on 2"NB stanchion pipe stand or wall
mount. (to be ordered seperately)
Option Drain Port on instrument side with drain plug.
Test Port on process side with plug.
Accessory Mounting Bolts - IS : 1364 - 1960 - 4 Nos
Interface seal - PTFE / VITON - 2 Nos

Télécharger la fiche technique répéteur RS422/485 (PDF Three Valve, Direct Mounting - T Type)

Vous souhaitez obtenir un prix ou un devis, cliquez sur ce lien puis complétez le formulaire. Nous vous informons que nos tarifs sont dégressifs pour des commandes quantitatives.

 

Vous avez des questions ou des demandes particulières à formuler, contactez-nous ! Notre service communication se tient à votre disposition et vous répondra dans les plus brefs délais.