Request a quote

Salient features & benefits

• Widely used for high pressure & high temperature steam flow

• Useful for flow measurement at high velocities

• Rounded inlet not subject to wear or damage, extending product life

• Better sweep-through effect for debris and liquids, eliminate damming effect

• Lower susceptibility to erosion

• Extended product life with no moving parts

 

Holding ring type flow nozzle

These types of nozzles are designed for installation in a pipe without flanges. The flow nozzle is installed with the help of holding ring and locating pins which are made of same material as that of pipe thereby eliminating welding of dissimilar materials.

 

Flanged type flow nozzle

These types of nozzles are the most commonly used for insertion between pipe flanges. This type of nozzle is designed for pipe wall taps whose locations are determined by Beta ratio and pipe.

 

Weld-in type flow nozzle

This type of nozzle has a machined tongue around its greatest diameter designed to fit between beveled ends of both inlet and outlet pipe section. The pipe sections, with the nozzle in place are firmly clamped and welded. The weld-in flow nozzle is used where flanges are not applicable such as high temperature and pressure applications in power plant installations, feed water,etc.

 

Flanged type throat-tap flow nozzle

Flange type throat-tap flow nozzle is used when extreme accuracy and repeatability required. In most cases this type of nozzle is purchased with a complete flow section and laboratory flow calibrated. This type of nozzles are manufactured in strict accordance with ASME performance test code PTC-6.