ADT-912 Pneumatic Low Pressure Test Pump

ADT-912 Pneumatic Low Pressure Test Pump - Prisma Request a quote

Model : ADT-912

Range :  95% vacuum to 60psi (4bar).

The ADT-912 Pneumatic Pressure Test Pump is a hand operated pressure pump designed to generate pressure from 95% vacuum to 60psi (4bar). A high-quality screw press is designed for fine pressure adjustment, with an adjustment resolution up to 0.1 Pa (0.001 mbar). The ADT-912 is a very stable low pressure calibrator. It makes use of an isothermal bellows chamber which is designed for reducing the possible effects of environmental temperature change. Most pumps make use of a check valve (non-returning valve) and are not well insulated which will cause large fluctuations in pressure with a change in ambient temperature or when the unit is touched. The ADT-912 does not use a check valve and is remarkably stable. Two hand-tight connectors installed on the pump allow easy connecting and disconnecting to the test pump without the need for PTFE tape or wrenches. The ADT-912 is an ideal comparison test pump for low pressure application.

  • Datasheet
  • Features
  • Specifications

Download the dataseet (ADT-912 PDF )


• Portable:
Only 6.2 lb (2.8kg)
• Adjustment Resolution
0.1Pa (0.001 mbar)
High-quality screw press for fine pressure adjustment
• Great Stability
Isothermal chamber: the pressure chamber is insulated to reduce the influence from environmental temperature changes.
Specially designed bellows minimize leakage to
guarantee excellent stability
Shut-off valve closes the air in the isothermal chamberduring calibration
• Durable and Minimal Maintenance
Built-in gas-liquid isolator protects the pump from
moisture and dirt
• Easy-to-use
• Hand-tight Quick Connectors
Allows easy connecting and disconnecting to the test pump without the need for PTFE tape or wrenches.

 

• Media:
Air.

• Generated Pressure Range
95% vacuum to 60 psi (4bar) positive pressure

• Adjustment Resolution:
0.1 Pa (0.001 mbar).

• Material:
Ram/adapters: SST

Body: SST/aluminum

Seals: Buna-N

• Connection
Hand-tight connectors for both test gauge and reference gauge.

Test Gauge connection: 1/4NPT female, 1/4BSP female, or M20X1.5 female

Reference Gauge Connection: 1/4NPT female, 1/4BSP female, or M20X1.5 female

• Dimensions:
Height: 5.51'' (140 mm)

Base: 10.75'' (273 mm) x 10.16'' (258 mm)

• Weight:
6.2 lb (2.8 kg).

• Warranty:
1 year.