EX9543 Enhanced 10/100 Base-TX to 100 Base-FX Media Converter convertor

EX9543 Enhanced 10/100 Base-TX to 100 Base-FX Media Converter convertor - Prisma Request a quote

Model : EX9543

 

The Converter is enhanced with Link Fault Signaling (LFS) and Loopback Test (LBK) functions to offer the most comprehensive network status monitoring and connection diagnostics. It is designed for large workgroups who demand higher speed and wider bandwidth. It allows migration and expansion from a copper-based Ethernet to a fiber optic Fast Ethernet. It features automatic MDI detection setting. This function allows for simple direct connection to a workstation, switch or hub. Therefore, network managers no longer need to worry about cable type configuration when establishing a connection between RJ-45 ports.This Converter is equipped with an RJ-45 port and a fiber optic ST or SC or WDM port. This allows it to quickly integrate a 10/100Base-TX network into a 100Base-FX (fiber) network. It features DIP switches for manual half or full duplex mode configuration on both copper and fiber ports. In full duplex mode, this Converter has the ability to support distances of up to 2 kilometers for multi-mode fiber and up to 60 kilometers for long-haul single mode fiber between a LAN switch, file server or another networking device.

 

  • Features
  • Specifications
  • Datasheet
  • Informations
  • Automatic MDI/MDI-X selection on RJ-45 port
  • Link Fault Signaling (LFS)
  • Store-and -forward at full wire speed
  • Auto-negotiation, NWay support
  • Half/Full duplex mode selection
  • Remote and local loopback Test via DIP switch
  • When DIP switches are set, the system auto reboots to new configurations without powering-off.
  • Extends distance of up to 2km (6600 feet) multi mode fiber and 60km (198000 feet) long-haul single mode fiber
  • Compatible with other 10Base-T & 100Base-TX/FX devices
  • LEDs for at-a-glance device status
  • Suitable as stand-alone or in 19" 4/12-slot rackmount converter chassis or the single slot mini chassis (with internal power supply)
  • FCC Class A & CE approved
Standard IEEE 802.3 (10BASE-T Ethernet),
IEEE 802.3u (100BASE-TX/FX Fast Ethernet)
Connector

1x duplex fiber optic connector :
ST / SC types

or

1x simplex fiber optic connector :

WDM single fiber types
1x UTP 100/120ohm; RJ-45 type
Max. Distance

UTP: 100m Cat 3/4/5

Fiber Optic:
2km MM, dual fiber
60km Long-haul SM, dual fiber
20km (66000ft) SM, single fiber
40km Long-haul SM, single fiber
Power

External power supply: 12V DC @ 0.5A

Please see Manuel Appendix A for Internal Power Supply

 
Temperature

Operating: 0 to 50 Celsius

Storage: -20 to 70 Celsius
Humidity Operating: 10% to 80%RH
Storage: 5% to 90%RH
Emissions FCC Part 15 of Class A & CE approved
Dimensions 109.2x 73.8x 23.4 mm (L x W x H)
Switches for DIP 1 - Auto-negotiation (RJ-45)
DIP 2 - Copper port duplex mode
DIP 3 - Copper port data bit rate
DIP 4 - Fiber port duplex mode
DIP 5 - Link Fault Signaling (LFS)
DIP 6 - Local Loop Back (LLB)
DIP 7 - Remote Loop Back (RLB)

 

 

Download the datasheetRS422/485 repeater (PDF Enhanced 10/100 Base-TX à 100 Base-FX Media convertor)

You want to get a quote, please click on the link and fill in the form. Note that our prices are digressive according to quantities.

 

For more information or any specific request, please contact our services. We shall get back to you as soon as possible.